Sites → Terminals

Created 07 May 2025 • Updated 07 May 2025 • Updates

Terminals

Terminal groups are used when routing control is needed based on where the order originated from, from. The settings within the site section allow the mapping between the terminal names created in configuration and the physical terminals on site.

Routing rules will then use the terminal group followed by the ID number to determine the station the product items should be sent to.

Terminals Topics

Adding New Terminal Mapping

Follow these steps to add a new mappings:

  1. Click Add

  2. Select the required Terminal Group from the drop down

  3. Enter the Terminals by:

    • Entering the Name as setup in Aztec Theme Modelling | Site Setup | Devices

    • Entering the POS ID as automatically created in Aztec Theme Modelling | Site Setup | Devices

    Enter the value and press <enter> or by clicking the green cross to add

  4. Click Save

Remember that if terminals name changes in Theme Modelling the configuration mapping will need to be updated otherwise routing rules will fail because the name is no longer correct within the mapping

Field Settings & Information

Terminals

Terminal mapping defines the configuration between configuration terminal names and physical devices.

The following table of information describes each of the terminal mapping fields:
Field Description
Terminal Group

Drop down to define the terminal group defined in the associated site Kitchen Configuration
Terminals

Input to define the Aztec terminals to map to the terminal group, mappings can be by:

  • Terminal ID

  • Terminal Name